What's the matter with the brake system fault indicator on and off
The reason why the brake system fault indicator light is on and off is that the hand brake is not released or not fully released (check the hand brake); Or system false alarm. The brake system is abnormal
The reason why the brake system fault indicator light is on and off is that the hand brake is not released or not fully released (check the hand brake); Or system false alarm. The brake system is abnormal, which is manifested in poor or failed braking, unilateral brake deviation, brake noise, brake drum heating caused by brake drag, and parking brake failure.
The method to remove the brake system fault indicator lamp from lighting is:
1. The brake pads are seriously worn. The brake pads are divided into two types: those with sensing lines and those without sensing lines. When the brake pads are worn to the limit, the sensing lines will automatically connect the circuit, and then the fault light will be on. The brake pads need to be replaced;
2. If the brake fluid level is too low, the brake fluid loss will also be accompanied by a significant lack of braking force, which may even lead to the loss of braking force. In this case, the warning lamp will be on. Just replenish the brake fluid in time;
3. The brake system leaks oil and gives false alarm. It directly affects the technical performance of the car, leading to the waste of lubricating oil and fuel, power consumption, affecting the cleanliness of the car, and causing environmental pollution. The fault lamp will light up, and the gasket or oil seal shall be replaced to solve the problem.